He brought us the most beautiful build for the Vintage Workshop Storage Bench... and now Robohead brings us the Crates! Yahoo.. Built to fit the workshop storage bench perfectly, these also seem like they have dozens of other fabulous uses too! Can't you see it now? I'm thinking perfect for toys... of course I might always be thinking that. Imagine fruit in the kitchen, and any other thing you want to contain but still see a tad!
Showcase: Built From These Plans
**To make 3 bins, for only 1 bin purchase a shorter 1x12 and 10 linear feet of 1/2" x 1 1/2" trim board.
For 1 Crate:
For 3 Crates:
Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.
Cut your Front, Back, and Bottom to size. If you would like to carve out handles you should do this on the Front and Back pieces prior to assembling. You can use a router or a jig saw, even a hole saw will work if you are clever about it. Once your pieces are ready, glue and nail together with the bottom inset between the front and back.
To create the slats, you can rip a 2x4 into 1/2" wide strips that are 1 1/2" in height and 13" in length. If this isn't an option for you, you can also purchase trim boards in this dimension but keep in mind it will be more costly. Tack on the slats using glue and nails.
To create the decorative trim on the front and back, you will rip a 2x4 in the same manner as the step above only your lengths will be at 8" for this step. Again you can purchase this material if you aren't able to make it! Then simply glue to the front and back as shown.
Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School
If you enjoyed this post PLEASE PIN IT! Definitely comment below, Share it or Like it, and subscribe to my feed to stay up to date!
You can now also: Follow my blog with blog lovin!
I would love for you to check out my other site: Handmade-Holiday! For all of your DIY Holiday Decor, Gifts, Parties, and More!
**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.