These boxes are a fantastic way to use up scraps… Plywood, boards, etc. Easily customizable, they would be a fun addition to any décor whether painted or stained. Instead of solid pieces, the top and bottom could be pieced together with the Kreg jig for a “planked” look.
Showcase: Built From These Plans
Vintage General Supply Box
Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.
Cut all of the pieces for the box. Assemble with glue and 1-1/4” brad nails by securing the sides to the top or bottom, then secure the front and back pieces.
Cut the trim pieces and attach with glue and 1-1/4” brad nails. The bottom trim pieces are offset so the boxes can be securely stacked.
Attach the hardware to the box. The only hinges I could find were steel so I primed them with rusty metal primer (which helps the paint adhere better) then I spray painted them oil-rubbed bronze.
Stencil or freehand any name, words, etc. to the front.
Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School
If you enjoyed this post PLEASE PIN IT! Definitely comment below, Share it or Like it, and subscribe to my feed to stay up to date!
You can now also: Follow my blog with blog lovin!
I would love for you to check out my other site: Handmade-Holiday! For all of your DIY Holiday Decor, Gifts, Parties, and More!
**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.
Mummies Ghosts and Bats
The DIY Club So Soft Pillow
Glitter and Ghouls
31 Days of Hope
Kitchens to Die For