Plans

Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase

07.12.12 By //
The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase

I think it’s high time we had a corner unit bookshelf, no? These easy to build furniture plans are just the thing…

Estimated Cost

$50-$75

Dimensions
Dimensions for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Tools
  • Tape Measure
  • Saw – Jig, Circular, or Miter
  • Drill
  • Square
  • Sander
  • Kreg Jig
  • Brad Nailer
Lumber
  • 1 – 2×2 at 8’
  • 1 – 2×2 at 3’
  • 2 – 1×2 at 8’
  • 1 – 1×3 at 3’
  • One sheet of ¼” plywood, lauan, or hardboard
  • One sheet of ¾” plywood
Materials
  • 1-1/4” pocket hole screws
  • 2” pocket hole screws
  • 1-1/4” brad nails
  • Wood filler
  • Sandpaper
  • Wood glue
  • Finishing Supplies
Cut List
  • 5 – 2×2 at 29-1/4” – Legs
  • 2 – 1×2 at 11” – Side Frames
  • 2 – 1×3 at 11” – Side Frames
  • 2 – ¾” plywood at 11” x 21-1/4” – Side Panels
  • 4 – 1×2 at 26” – Back Supports
  • 2 – 1×2 at 13-1/2” – Front Supports
  • 2 – 1×2 at 14-1/4” – Front Supports
  • 2 – ¾” plywood at 27-1/2” x 27-1/2” – Shelves
  • 2 – ¼” plywood, lauan, or hardboard at 25” x 27-1/2” – Back
  • 1 – ¾” plywood at 29-3/4” x 29-3/4” – Top
Instructions

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Bookcase Sides for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Step 1

Cut the pieces for the legs and the sides. Set the Kreg jig for ¾” material and drill pocket holes in each end of the side pieces. Attach to the legs as shown using glue and 2” pocket hole screws. The back side of the side pieces should be flush with the inside face of the legs.

Cut the pieces for the side panels. Drill pocket holes as shown and attach to the leg frames with glue and 1-1/4” pocket hole screws.

Bookcase Back Support and Legs for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Bookcase Front Supports for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Step 2

Cut the pieces for the back aprons and the back leg. Drill pocket holes in each end of the aprons and attach to the legs as shown using glue and 2” pocket hole screws. The outside face of the aprons should be flush with the outside face of the legs.

Cut the pieces for the front aprons. Note that one side of the aprons is shorter than the other. This allows the shorter side to attach to the longer side and create the “L” shape. Drill pocket holes in both ends of the shorter pieces and one end only of the longer pieces. Attach as shown using glue and 2” pocket hole screws where the aprons attach to the legs. 1-1/4” pocket hole screws will be used where the aprons attach to each other.

Step 3
Bookcase Shelf Diagram for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Bookcase Shelves for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Step 3

Cut the pieces for the shelves. Drill pocket holes as shown and attach to the side panels with glue and 1-1/4” pocket hole screws. The lower shelf can be secured to the lower aprons with 1-1/4” brad nails through the top of the shelf into the aprons.

Bookcase Back for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Step 4

Cut the pieces for the back. Secure to the back of the bookshelf and upper shelf with glue and 1-1/4” brad nails.

Bookcase Top Diagram for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Bookcase Top for The Design Confidential for Free DIY Furniture Plans to Build a Pottery Barn Kids Inspired Cameron Corner Bookcase
Step 5

Cut the piece for the top. Attach the top to the shelf with glue and 1-1/4” brad nails through the top into the legs and aprons. The top will overlap by ½” on the sides and front.

Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

Print Friendly, PDF & Email

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.