Jul
09
2012
Project Image

For the little ones in your lives that want to garden and soak in the great outdoors! This easy to build kids potting bench is sure to supply hours on end of fun and perhaps even productivity in the garden!

Showcase: Built From These PlansI am so honored each and every time one of you fine friends builds from these very plans! If you have built this piece, please take a moment and showcase your build! We are dying to see your fabulous hard work!

Estimated Cost

$50-$75

Dimensions
Dimensions for This Project
Tools
  • Tape Measure
  • Saw – Jig, Circular, or Miter
  • Drill
  • Square
  • Sander
  • Kreg Jig
  • Brad Nailer
Lumber
  • 1 – 2x2 at 8’
  • 3 – 1x2 at 8’
  • 3 – 1x3 at 8’
  • 1 – 1x4 at 8’
  • 1 – 1x6 at 6’
  • 1 – 1x8 at 3’
  • Half sheet of ¼” plywood, lauan, or hardboard
Materials
  • 1-1/4” pocket hole screws
  • 2” pocket hole screws
  • 1-1/4” brad nails
  • Wood filler
  • Sandpaper
  • Wood glue
  • Finishing Supplies
Cut List
  •  4 – 2x2 at 21-1/2” – Legs
  • 6 – 1x2 at 15” – Shelf Aprons, Shelf & Bench Frames
  • 2 – 1x4 at 15” – Bench Aprons
  • 7 – 1x2 at 25” – Shelf Aprons & Frame, Bench & Shelf Supports
  • 2 – 1x4 at 25” – Bench Aprons
  • 2 – 1x2 at 28” – Bench Frame
  • 18-1x3 at 15” – Shelf & Bench Slats
  • 2 – 1x6 at 18-1/4” – Hutch Sides
  • 1 – 1x6 at 25-1/2” – Hutch Shelf
  • 1 – 1x8 (ripped to 6” wide) at 28” – Hutch Top
  • 1 – ¼” plywood, lauan, or hardboard at 19” x 27” - Back
Instructions

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Step 1

Cut the pieces for the legs and aprons. Set the Kreg jig for ¾” material and drill pocket holes in each end of the apron pieces. Attach the shorter aprons to the legs with glue and 2” pocket hole screws. The back face of the aprons should be flush with the inside face of the legs.

Attach the longer aprons as shown using glue and 2” pocket hole screws.

Step 1
Step 1
Step 2

Cut the piece for the shelf support. Drill pocket holes at each end and attach to the shelf aprons using glue and 1-1/4” pocket hole screws.

Step 2
Step 3

Cut the pieces for the shelf frame and slats. Assemble as shown using glue and 1-1/4” pocket hole screws.

Attach the shelf to the shelf aprons using glue and 1-1/4” brad nails through the frame and slats into the aprons and support.

Step 3
Step 3
Step 4

Cut the pieces for the bench supports. Cut the piece for the shelf support. Drill pocket holes at each end and attach to the shelf aprons using glue and 1-1/4” pocket hole screws. The top of the supports should be flush with the top of the aprons.

Step 4
Step 5

Cut the pieces for the bench frame and slats. Assemble as shown using glue and 1-1/4” pocket hole screws.

Attach the top to the aprons using glue and 1-1/4” brad nails through the frame and slats into the aprons and supports.

Step 5
Step 5
Step 6

 

 Cut the pieces for the hutch sides. Cut the arcs as shown with a jigsaw. Drill pocket holes in the ends of each piece and attach to the bench top using glue and 1-1/4” pocket hole screws. The hutch sides should be located ½” in from each side of the top as well as ¼” from the back edge.

Step 6
Step 7

Cut the piece for the hutch shelf. Drill pocket holes in each end and attach using glue and 1-1/4” pocket hole screws.

Step 7
Step 8

Cut the piece for the hutch top. The top will overlap the front and sides by ½”. Attach using glue and 1-1/4” pocket hole screws through the sides into the top.

Step 8
Step 9

Cut the piece for the back. Attach using glue and 1-1/4” brad nails.

Step 9
Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

Note

This post brought to you by Waltons Potting Sheds

Disclaimer

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

drupal counter