Mar
10
2014

This console table doubles as a bookshelf and storage unit. Build two units and wrap a corner of your sofa, or build several and line the whole back side of that baby! I am currently using two expedit shelving units on the backside of my floating sofa, so for those of you who don't have a wall to place your sofa along, this is a fabulous solution.  With a modern shape and a low profile, it serves double duty by giving you a storage solution and providing you with a bit of a room divider at the same time. Xx... Rayan 

Estimated Cost

$25-$50

Dimensions
Tools
Lumber
  • ½ sht. ¾” plywood
Materials
Cut List

All pieces are cut from ¾” plywood and the grain should run parallel to the longest side except as noted–

  • 3 – 10” x 38” - Shelves
  • 1 – 6-1/2” x 9-1/4” – Upper Divider
  • 1 – 9-1/4” x 12-1/4” – Lower Divider * Grain will run parallel with 9-1/4” side
  • 1 – 6-1/2” x 29-3/4” – Upper Back
  • 1 – 12-1/4” x 29-3/4” – Lower Back
Instructions

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Step 1

Cut all pieces as indicated. It would be a good idea to sand each piece after cutting and drilling the pocket holes because sanding after assembly may be difficult! Also, if you choose to use edge banding on the plywood edges, this would be a good time to apply that to all edges that will be exposed. If you prefer to leave them exposed, sand really well. Using the Kreg jig set for ¾” material and the Lower Divider, drill pocket holes along the 9-1/4” edges. Attach with 1-1/4” screws to one of the Shelves (this will be the lower shelf), 8-1/4” in from the edge. Make sure the front of the divider is even with the front of the lower shelf. This will allow for attaching the back.

Step 2

Drill pocket holes in the Lower Back piece on each of the 29-3/4” edges. Attach to the lower shelf and to the divider with the pocket holes facing out. See drawing.

Step 3

Lay the middle shelf on this assembly and attach with 1-1/4” screws through the pocket holes on the back and divider pieces.

Step 4

Drill pocket holes in the 9-1/4” edges of the Upper Divider and attach the divider 8-1/4” in from the edge of the middle shelf. Make sure the upper divider is placed opposite of the lower divider. See drawings

Step 5

Drill pocket holes in the Upper Back along the 29-3/4” edges. Fasten to upper divider and middle shelf with 1-1/4” screws.

Step 6

Lay the last 10” x 38” piece on top of the assembly and attach with 1-1/4” screws through the remaining pocket holes in the upper back. Finish as desired.

Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

Disclaimer

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of The Design Confidential. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.  // Post contains affiliate links

drupal counter