Jan
01
2011
Project Image
Project Details

This plan is so simple, but when I saw it, it had me excited to build it right away. I guess we know where I will be headed this afternoon! Funny how that happens... This retails for $399 for 1 unit! The cost to build it yourself...$25. Incredible right? I love that it adds just a bit of interest to an otherwise standard cubby system and allows you the modular ability to stack and stand side by side. I just adore options!

Showcase: Built From These Plans

Estimated Cost

Under $25

Tools
  • Tape Measure
  • Square
  • Sander
  • Drill
  • Kreg Jig - Optional but quite handy and worth your while
Lumber
  • 1 - 1x12 at 10' (2 shelves, 1 side)
  • 1 - 1x12 at 8' (1 side, 1 shelf)
  • 1 - 1x3 at 8' 2 - 1x2 at 8'
Materials
  • Consider adding Bronze Label Holders like these or these in brass
  • 1 1/4" Pocket hole screws
  • 2" Wood Screws
  • Wood Glue
  • Wood Filler
  • Sanding Suppies
  • Finishing Supplies
Cut List
  • 2 - 1x12 at 36" Sides
  • 3 - 1x12 at 40 1/2" Top, bottom, and middle shelves
  • 4 - 1x12 at 16 7/8" Divider Shelves
  • 12 - 1x2 at 13" Support Cleats (you can get away with only 6 if you prefer, but this will depend on what you will use this cubby system for)
  • 2 - 1x3 at 42 1/2" Front Rails
Instructions

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Step 1

Build your box and fasten the Shelves to the Sides using a Pocket Hole System set for 3/4" stock and your 1 1/4" pocket hole screws. If you aren't using a pocket hole system, use glue and 2" screws...be sure to countersink.

Step 1
Step 2

Fasten the Divider Shelves in place using your pocket hole system set for 3/4" stock and your 1 1/4" pocket hole screws. If you aren't using a pocket hole system, use 2" screws and glue and screw at an angle, be sure to countersink.

Step 2
Step 3

Fasten the Support cleats in place: **This step is optional and will depend on your ultimate use for this unit. If you plan to stack them 2 or 3 high, I recommend this step. If not and you will opt for a single row of units, you can probably do without this step (I did for mine which was only a single unit, one high). Use your Pocket Hole System set for 3/4" stock and your 1 1/4" pocket hole screws. If you aren't using a pocket hole system, use 2" screws and glue, screw at an angle where necessary and be sure to countersink and pre-drill.

Step 3
Step 4

Add Rails to the front. Use 2" Screws and Glue to secure, be sure to countersink for the most professional appearance and fasten to the sides, shelves and dividers.

Step 4
Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

Note

 

If you enjoyed this post PLEASE PIN IT! Definitely comment below, Share it or Like it, and subscribe to my feed to stay up to date!

You can now also: Follow my blog with blog lovin

I would love for you to check out my other site: Handmade-Holiday! For all of your DIY Holiday Decor, Gifts, Parties, and More!

Knock Offs 
Disclaimer

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

drupal counter