Free Woodworking Plans to Build a PB Teen Inspired Stuff your Stuff Media Console
I'm excited to say this is our very first set of plans in the new format in our new home! If you haven't been over to check out the new site, you definitely should, I think you will be quite pleased! Members who register will be able to save projects in their bookmarks folder on their profile page, so if this is a project you adore, head over and register and start saving your faves!
Let's get down to business...
A fabulous media console to go with the other pieces in our
Stuff your Stuff Collection! This would be amazing in a kid's room or playroom but frankly this would be perfect in the family room as well!
Jig Saw – optional and you can also use a table saw or circular saw to notch out the corners of the shelf boards.
Kreg Jig® (pocket hole system)
1 - 2x3 at 10' or 2 at 6'
5 - 1x2 at 8'
1 - 1x3 at 10' or 2 at 6'
1/2 Sheet of 1/4" Ply at 4'x4'
1/2 Sheet of 3/4" Ply at 4'x4'
1 Sheet of 3/4" Ply
1 1/4” Pocket Hole Screws
1 1/4” Finish Nails
5 – 2x3 at 22 1/4” Legs
4 – 1x2 at 13 1/2” Side Panel Trim
5 - 1x2 at 14 1/4" Supports
1 - 1x2 at 14 3/4" Vertical Front Face Frame Trim
1 - 1x2 at 55 1/2" Bottom Front Face Frame Trim
4 - 1x2 at 26 1/2" Back Side Rails
1 - 1x2 at 60 1/2" Front Trim (Under Top Trim)
1 - 1x3 at 55 1/2" Top Front Face Frame Trim
1 - 1x3 at 62" Top Trim
2 – 3/4” Ply at 13 1/2” x 18 3/4” Side Panels
1 - 3/4" Ply at 58" x 15 1/2" Bottom Panel
2 - 3/4" Ply at 15 1/2" x 17 1/4" Outside Vertical Dividers
1 - 3/4" Ply at 14 1/4" x 17 1/4" Center Vertical Divider
2 - 3/4" Ply at 9 1/2" x 14 3/4" Outside Shelves
2 - 3/4" Ply at 18 3/8" x 15 1/2" Inside Shelves
1 - 3/4" Ply at 62" x 15 3/4" Top
2 - 1/4" Ply at 26 1/2" x 17 1/4" Back Panels
Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the
GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices.
Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.
Build the Side Panels: Attach the Side Panels to the Legs, use your
Kreg Jig® set for 3/4” stock and your 1 1/4” pocket hole screws and glue. The Side Panel will sit in the Center of the Leg. Then tack on your trim using 1 1/4" finish nails and glue. The trim will sit flush with the outside of the legs.
Frame Out the Structure: Attach the Rails to the Back legs, the Front Trim to the Front legs, and the Supports to the rails and front bottom trim. Use your
Kreg Jig® set for 3/4” stock and your 1 1/4” pocket hole screws and glue to attach.
Notch Out the Bottom Panel: Using a jig saw, circular saw or table saw, create your notches in the bottom panel and cut to size. use your
Kreg Jig® set for 3/4” stock and create pocket holes around the perimeter of the bottom panel for attaching to the Unit later.
Notch out the Outside Vertical Dividers and Attach all 3 to the Bottom Panel. You can use a countersink bit and screws to attach or you can use your
Kreg Jig® set for 3/4” stock and your 1 1/4” pocket hole screws and glue. If you choose to use your Kreg Jig, place the pocket holes on the dividers.
Notch out and Attach the Interior Shelves: use a jig saw or table saw to notch out your interior shelves and use your
Kreg Jig® set for 3/4” stock and your 1 1/4” pocket hole screws and glue to attach to the Vertical Dividers. You will want to place the pocket holes underneath on both sides of each shelf to attach them to both dividers they touch.
Notch out the Outside Shelves and Attach: use a jig saw or table saw to create the notches on the back of the Outside Shelves and attach to the Divider. Use your
Kreg Jig® set for 3/4” stock and your 1 1/4” pocket hole screws and glue to attach and be sure to add pocket holes on the outside edge that will fasten to the Side Panels in the next step.
Attach the Interior Unit: You will have pocket holes in the outside of the Outside Shelves and along the edge of the Bottom Panel for attaching to the Side Panels and you can attach the bottom to the Supports using 1 1/4" Nails and glue from underneath.
Attach the Top Supports and Front Trim: Use your
Kreg Jig® set for 3/4” stock and your 1 1/4” pocket hole screws and glue to fasten the supports in place and 1 1/4" finish nails and glue to tack on the front trim pieces.
Tack on the Back Panels: Use 1 1/4" finish nails and glue to attach to the dividers and shelves. Using a Hole Saw or Large Spade bit create your holes in the back to allow for cords to exit. You can create one or two depending on your plans for this unit and where you will place your electronics.
Tack on the Top and Front Trim for the Top: Use 1 1/4" finish nails and glue to attach.
Fill and nail or screw holes, sand, and finish as desired.
**Disclaimer: Some rights reserved. Private use only. Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.
If you enjoyed this post, comment below, Share it or Like it, and subscribe to my feed to stay up to date!
You can now also:
Follow my blog with blog lovin!