Plans

DIY Furniture Plans // How to Build a 90 Inch Big Sur Table

11.06.15 By //
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a 10 Foot Provence Beam Dining Table via @thedesconf

By special reader request… the 90 inch table! Of course if the 65 Inch is more your speed – plans for that are here.

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

$100-$150
  • 3 – 2×12 at 8′
  • 5 – 1×3 at 8′
  • 2 – 6×6 at 6′
  • 4 – 6×6 at 30″ (Legs)
  • 2 – 1×3 at 23 3/4″ (Side Aprons)
  • 6 – 1×3 at 30 1/4″ (Table Supports)
  • 2 – 1×3 at 79 1/2″ (Front/Back Aprons)
  • 3 – 2×12 at 90 ” (Table Tops)

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

The Design Confidential DIY Furniture Plans // How to Build a 90 Inch Big Sur Table

Attach the Side Aprons to the Legs. These will be fastened 1 1/2″ from the top of the leg and will sit back 1″ from the outside edge of your legs. Use your Kreg Jig set for 3/4″ material and your 1 1/4″ pocket hole screws with glue.

The Design Confidential DIY Furniture Plans // How to Build a 90 Inch Big Sur Table

Build the Frame // set your Kreg Jig for 3/4″ material and create your pocket holes. Use 1 1/4″ Pocket Hole Screws and Wood Glue to fasten together.

The Design Confidential DIY Furniture Plans // How to Build a 90 Inch Big Sur Table

Attach the Frame to the Legs // Use 3″ Screws and Wood Glue. Frame will sit 1 1/2″ from the top edge of the legs and will be centered front to back with a setback of 1″ from front edge of legs as well as on the backside.

Cut 3 boards to length for the top of your table. Remove a 3 1/2″ square from 2 of the corners for 2 of your boards. Use a jig saw, circular saw or router for this. Then attach your table top boards to the frame and aprons using 2″ finish nails and glue.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidential and not endorsed by or related to any said retailers. // Post May Contain Affiliate Links

Print Friendly, PDF & Email

13 comments on “DIY Furniture Plans // How to Build a 90 Inch Big Sur Table”

    1. hmmm i see that. not sure where they have gone, but i will get to the bottom of it right away! stay tuned and check back shortly – i will get things all fixed up!

  1. Thank you for these plans. Could you clarify the size of the legs for me? In the materials and cut list you reference 6×6 but in Step 4 you are referring to leg widths of 3.5″.

    I might be missing something as I am new to woodworking but thank you in advance.

    1. eek, yep you are correct that it is confusing! this plan should call for 6×6 beams and you will want to carve out a 5 1/2″ square in the corners. it can also be made with 4×4’s (3.5″) but with the longer length i am thinking the 6×6 will ring true to form and look a bit more amazing… i will get the diagram fixed!

  2. Quick question on stability: I built the table this weekend almost to the T of the directs (the only difference is that we used 4 – 1×10’s instead of 3 – 2×12’s for the top so it’s a tad wider). We’ve noticed that it seems to have a little bit of weakness in the 90″ direction (aka it wobbles a bit if you lean into the end). Do you have any tips to help stabilize it?

    Thanks!

    1. So it very likely has to do with swapping the boards to a thinner stock. I realize you have already built your beauty, but if it is majorly problematic I would suggest switching back to the thicker stock and use 2×10’s rather than 1×10’s. They will have greater tensile strength and you will have much less wiggle to your wobble. Also, you can try to level your legs to work against the wobble. It is possible to add the tiniest bit of slant to the bottom of the legs on one or both sides to remove the tables ability to lean so much in one direction or another. And…. if you think it seems to have something to do with where the top connects to the legs, then I would recommend attempting to squeeze a bit more glue down into the joint while you have it clamped, and maybe even secure it further with a screw or some nails.

  3. I am a rookie so bear with me and attempting this…but in Step 1 it references a 23 1/4″ side apron, the measurement list is 23 3/4″ and looking at the 65″ table it is 26 3/4″ on the cut list. Which is correct?
    I also found a place that sells 1″ and 1 1/2″ white oak slabs for the top, so it can be a single surface which I am going to attempt as well, but know that will change the measurements anyway as it won’t be 2×12’s with 3/8″ gaps but want to confirm it first so I can adjust accordingly. Thanks for these plans…my project will start this winter!

    1. I have a matching bench that is 48″ long, but it was originally meant for the shorter table (64″ or so I think). I would be happy to draft plans for a longer bench if you like?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.