Plans

DIY Furniture Plans // How to Build a Storage Base for the Twin House Bed

05.21.18 By //

Ready to upgrade your Twin House Bed? How about some amazing storage tucked away beneath it? This storage base features 6 spacious drawers and plywood panels to keep all of the kid crumbs out of said drawers. This plan is the perfect compliment to our Twin House Bed Platform + Chimney. Let’s get building!

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

$175-$225

  • 3 – 1×2 at 8’
  • 6 – 1×4 at 8′
  • 3 – 3/4” plywood at 4’x8’
  • 2 – 1×4 at 6’ 3” – Base Frame A
  • 2 – 1×4 at 2’ 8” – Base Frame B
  • 2 – 3/4” plywood at 3’ 3”x9-1/4” – Base A
  • 1 – 3/4” plywood at 6’ 1-1/2”x9-1/4” – Base B
  • 4 – 3/4” plywood at 1’ 7-1/8”x9-1/4” – Base C
  • 12 – 1×2 at 1’ 6-3/8” – Drawer Guides
  • 12 – 1×4 at 2’ – Crumb Cover Supports
  • 12 – 3/4” plywood at 1’ 5”x6-1/2” – Drawer Sides
  • 6 – 3/4” plywood at 1’ 10-1/4”x1’ 5” – Drawer Bottoms
  • 6 – 3/4” plywood at 1’ 10-1/4”x5-3/4” – Drawer Backs
  • 6 – 3/4” plywood at 1’ 11-3/4”x9” – Drawer Fronts
  • 2 – 3/4” plywood at 6’x1’ 5-1/4” – Crumb Covers

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for Base Frame A and Base Frame B (shown here in white for contrast). With the Kreg jig set for 3/4” material, drill pocket holes in each end of the Base Frame B pieces. Assemble the Base Frame B pieces to the Base Frame A pieces as shown with glue and 1-1/4” pocket screws.

Next, cut the pieces for the Base A pieces (shown here in white for contrast). With the Kreg jig set for 3/4” material, drill pocket holes in the bottom edge of the Base A pieces. Assemble the Base A pieces to Base Frame A and B pieces as shown with glue and 1-1/4” pocket screws. If desired, attach edge banding to the short edges of the Base A pieces for a more finished look.

Cut the Base B piece. With the Kreg jig set for 3/4” material, drill pocket holes in the ends of the Base B piece. Assemble the Base B piece to the Base A pieces as shown with glue and 1-1/4” pocket screws.

Cut the Base C pieces. With the Kreg jig set for 3/4” material, drill pocket holes as shown in the Base C pieces. Assemble the Base C pieces as shown with glue and 1-1/4” pocket screws. If desired, attach edge banding to the short outside edge of the Base C pieces for a more finished look.

Cut the Drawer Guide pieces. Assemble the Drawer pieces as shown with glue and 1-1/4” wood screws.

Cut the Crumb Cover pieces. With the Kreg jig set for 3/4” material, drill pocket holes as shown in each end of the Crumb Cover pieces. Assemble the Crumb Cover pieces as shown with glue and 1-1/4” pocket screws.

Cut the Drawer Side and Drawer Bottom pieces. With the Kreg jig set for 3/4” material, drill pocket holes as shown in the Drawer Side and Drawer Bottom pieces. Assemble the pieces as shown with glue and 1-1/4” pocket screws.

Cut the Drawer Back pieces. With the Kreg jig set for 3/4” material, drill pocket holes as shown in the Drawer Back pieces. Assemble the pieces as shown with glue and 1-1/4” pocket screws.

Cut the Drawer Front pieces. Assemble the Drawer Front pieces to the Drawer Side and Drawer Bottom pieces as shown with glue and 1-1/4” pocket screws. Attach drawer pulls as specified by manufacturer’s recommendations. If desired, attach edge banding to the all edges of the Drawer Front pieces for a more finished look.

Install the Drawers. There should be a 1/8” gap along all sides of the Drawers.

Cut the pieces for the Crumb Covers. Assemble the Crumb Cover pieces as shown with glue and 1-1/4” wood screws.

Place the Twin House Bed on top of the Twin House Bed Storage Base as shown (we are only showing the very bottom of the Twin House Bed in white for contrast). Use 2-1/2” wood screws through the 2x4s of the Twin House Bed Base into the Crumb Covers to secure.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School.

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!
Print Friendly, PDF & Email

1 comment on “DIY Furniture Plans // How to Build a Storage Base for the Twin House Bed”

  1. do you have these plans for the toddler house bed? I’m building the toddler house bed and would love some storage under the bed as I’m losing the storage space I had under the crib.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.