This piece is a fun addition to our Stuff your Stuff Collection for a full sized bed! This is what goes behind the bed for hide away trolley storage that conveniently rolls right into the opening. It also acts as the headboard for the bed, and the base for a storage hutch above it! So fun and perfect for dual function furniture and all of your living and storage needs! Stay tuned for additional sizes and the accompanying pieces!
As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!
$25-$50
- Tape Measure
- Saw – Jig Saw, Circular, Table, or Miter Saw
- Drill
- Multi-Square and Carpenter’s Square
- Sander
- Kreg Jig – if you build frequently, invest in this one.
- Nail Gun
- 2 – 1×2 at 8’
- 2 – 1×3 at 6’
- 1 – 2×3 at 8’
- 1 – 3/4”x3/4” Square Dowel or Trim at 6’
- 1 – 3/4”x3/4” Square Dowel or Trim at 3’
- 1 Sheet of 3/4” Ply or MDF
- 1-1/4″ Pocket Hole Screws
- 1-1/4″ Brad Nails
- Countersink Drill Bit
- Pocket Hole Plugs – Paint Grade, Pine, Oak – optional
- Clamps
- Safety Gear
- 3/4″ Edge Banding – optional
- Wood Filler
- Wood Glue
- Sanding Supplies
- Paste Wax
- Finishing Supplies
- 4 – 2×3 at 23 1/2” Legs
- 2 – 1×3 at 53” Front and Back Aprons
- 2 – 1×3 at 12 1/2” Side Aprons
- 2 – 1×2 at 14 1/4” Top Trim
- 2 – 1×2 at 60” Top Trim
- 2 – 3/4” Ply or MDF at 53” x 23 1/2” Front and Back Panels
- 1 – 3/4” Ply or MDF at 57” x 14 1/4” Top
- 1 – 3/4” x 3/4” Square Dowel Trim at 59 1/2” Trim
- 2 – 3/4” x 3/4” Square Dowel Trim at 15 1/2” Trim
Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.
Build the Structure: The Aprons will sit flush with the inside of the Legs on the Front and Back whereas they will sit flush with the outsides of the legs on the sides. Fasten the Aprons to the Legs using your Kreg Jig set for 3/4” stock and your 1 1/4” pocket hole screws and glue.
Tack on the Front and Back Panels: Use 1 1/4” Screws from inside the aprons or 1 1/4” finish nails on the outside. Use glue to secure.
Tack on the Top and Surrounding Trim: Fasten the Top Panel to the Surrounding Trim Frame using Pocket hole screws and glue, place your pocket holes in the center panel to attach to the frame, and also in the short sides of the surrounding trim frame, connecting them to the longer trim sides. Tack the top down using 1 1/4” finish nails and glue. Center the top on the unit when attaching. Once your top is in place, nail on the remaining trim just underneath the top and trim frame. Use glue and 1 1/4” finish nails and glue. This trim will only run around 3 of the 4 sides (skip the back) unless you want to surround each side.
Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School
**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.
