This is one of the tables I made from the plans on your website. Thank you for supplying these plans for anyone to use.
Built From These Plans
On the coffee table I installed an extra row of 2″ spacers down the center of the table top. On the legs I laced an inside leg to create a T shaped leg. Also I added 2 shelves under the table to hold remotes. Lastly, the legs are removable. I used 4 1/2″ threaded rod, like the hinges on the end tables. The reason for this is that it weighed way to much to move. I also only made the table about 30″x51″ instead of 35 1/4″x51″.
Made of 3/4″ pine plywood, ripped down.