Ah, Venice Beach – the sun, the wind, the waves… the simple life! And there is plenty of “Venice” in this super easy Venice Bookshelf build! This build displays 5 shelves that sit lightly on their supports – plenty of space for all that crisp Spring weather to blow through… no matter how close you are to Venice Beach!
As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!
- 7 – 1 x 2 at 8′
- 3 – 1 x 12 at 8′
- 4 – 1×2 at 71”– Shelf Legs
- 10 – 1×2 at 12” – Shelf Supports
- 5 – 1×12 at 36” – Shelf Bottoms
- 5 – 1×2 at 36” – Shelf Backs
Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to make sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.
Cut the pieces for the Shelf Legs.
Cut the pieces for the Shelf Supports. With the Kreg jig set for 3/4” material, drill pocket holes in each end of the Shelf Supports.
Assemble Shelf Supports and Shelf Legs as shown with glue and 1-1/4” pocket screws.
Cut the pieces for the Shelf Bottoms and Shelf Backs. Attach the Shelf Backs to the Shelf Bottoms with glue and 1-1/4” wood screws. Insert the screws through the Shelf Bottoms into the Shelf Backs.
Place the Shelf Bottom/Shelf Back assembly onto the Shelf Leg/Shelf Support assembly. Shelves will extend approximately 3″ past the Shelf Supports. For easy installation, the Shelf Bottoms will be approximately 3/4″ less deep than the Shelf Supports they sit on. If you wish to secure in place, screw 1-1/4” wood screws through the Shelf Bottom into the Shelf Support.
Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School