Plans

Free DIY Furniture Plans // How to Build a Magazine Sling Side Table

09.21.14 By //
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Magazine Sling Side Table via @thedesconf

I am so excited to share this simple multi function project plan with you guys! Part Side Table, part Magazine or anything you like storage and sheer gorgeous piece of furniture and easy to build plans! This Magazine Sling Side Table seems like it would blend seamlessly with any style of decor and is something even a non-sewing gal like myself could handle! Get your saw ready and make some sawdust fly on this beauty!

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Magazine Sling Side Table via @thedesconf
$55-$75
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Magazine Sling Side Table via @thedesconf
  • 1 – 2×2 at 8’
  • 1 – 2×4 at 8’
  • 1 – 1/2” plywood at – 2’x2’
  • 4 – 2×2 at 18-1/2” – Legs
  • 2 – 2×4 at 15-1/2” – Side Aprons
  • 2 – 2×4 at 23-1/2” – Front and Back Aprons
  • 1 – 2×4 at 15-1/2” – Top Support
  • 1 – 1/2” plywood at 13-1/2”x15-1/2” – Table Top
  • 2 – 1/2” plywood at 2”x15-1/2” – Sling Supports

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the Legs and Side Aprons. Set the Kreg jig for 1-1/2” material and drill pocket holes in the ends of the Side Aprons. Secure Side Aprons to the Legs as shown with glue and 2-1/2” pocket screws. Repeat this step twice, once for each side of the Table.

Cut the pieces for the Front and Back Aprons. Drill pocket screws in each end of the Aprons. Attach the Aprons to the Legs as shown with glue and 2-1/2” pocket screws. Make sure that the pocket holes face the inside of the Table as shown in the sketch.

Cut the Top Support. Drill pocket holes in the ends of the Top Support. Attach the Top Support to the Front and Back Aprons as shown with glue and 2-1/2” pocket screws. Make sure that the pocket holes face the same direction as shown in the sketch.

Cut the piece for the Table Top. Set the Kreg jig for 1/2” material and drill holes on the underside of the Table Top on all sides. Assemble as shown with glue and 2-1/2” pocket screws. The Table Top will sit 1/2” below the Aprons. Make sure that the pocket holes face the ground as shown in the sketch.

Now it’s time to cut the Sling fabric! Cut your fabric as shown. Turn under long edges of the Sling 1/2”, iron, and then turn it under another 1/2” and iron again. Repeat this process with the short edges of the Sling.

To secure the edges of the fabric, you can use iron-on adhesive, fabric glue, or sew the edges.

Cut the pieces for the Sling Supports. Drill pocket holes in each end of the Sling Supports. Don’t attach just yet!

Place one of the short ends of the Sling under the Sling Support. Attach the Sling Support with 2-1/2” pocket screws as shown to the Front and Back Aprons. The Sling end should extend 1/2” below the Sling Support. To further avoid the Sling from slipping out of the Sling Support when weighed down with magazines, screw the Sling Support to the adjacent Side Apron with 1-1/4” wood screws.

Repeat the same process for the other Sling Support. Let the Sling hang down into the opening.

Now all you have to do is grab a seat and a magazine… and relax!

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts

Print Friendly, PDF & Email

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.